Hi Guys,
Does anyone have a folding sink suitable for my Ansfold for sale or any ideas of an alternative. Also does anyone have the information re the measurements of the foam roof to wall seals eg; is it 2x2 2x3 1x3 etc.
Folding sink
-
- Posts: 22
- Joined: Mon, 14 Jul 2014, 7:25 pm
- Location: Rotherham, Yorkshire
Re: Folding sink
The (adhesive backed) foam strips that are stuck along the top edge of the side walls (that then meet the roof when you lift up the side walls) are 1 inch wide and half an inch high. You'll obviously need them long enough to run the length of both side walls, with a gap in the middle where the catches are.
Matthew
portafold.co.uk
----------------------------------------------------------------------------------
Wanted: Any original Portafold, Ansfold or Mini-Motel brochures, adverts or magazine articles.
Also, any chassis numbers for the above caravans!
portafold.co.uk
----------------------------------------------------------------------------------
Wanted: Any original Portafold, Ansfold or Mini-Motel brochures, adverts or magazine articles.
Also, any chassis numbers for the above caravans!
-
- Posts: 22
- Joined: Mon, 14 Jul 2014, 7:25 pm
- Location: Rotherham, Yorkshire
Re: Folding sink
Thanks Matthew, I now know what to look for at the Autojumble tomorrow.
Re: Folding sink
Matthew
portafold.co.uk
----------------------------------------------------------------------------------
Wanted: Any original Portafold, Ansfold or Mini-Motel brochures, adverts or magazine articles.
Also, any chassis numbers for the above caravans!
portafold.co.uk
----------------------------------------------------------------------------------
Wanted: Any original Portafold, Ansfold or Mini-Motel brochures, adverts or magazine articles.
Also, any chassis numbers for the above caravans!
Who is online
Users browsing this forum: No registered users